Ryobi P500 - Product Specifications; Features

8 9
LOCK-OFF
BUTTON
FEATURES
Fig. 1
PRODUCT SPECIFICATIONS
Motor..................................................................18 Volt DC
Blade Diameter...................................................... 5-1/2 in.
Blade Arbor ...............................................................3/8 in.
Cutting Depth at 0°.............................................. 1-9/16 in.
Cutting Depth at 45°.............................................. 1-1/8 in.
BLADE
UPPER
BLADE
GUARD
LOWER BLADE
GUARD
SWITCH
TRIGGER
LOWER BLADE
GUARD HANDLE
BEVEL
ADJUSTMENT
KNOB
HANDLE
LASER
GUIDE
LASER GUIDE
SWITCH
Charger Input .................................. 120 V, 60 Hz, AC Only
Charge Rate .............................................................1 Hour
No Load Speed ...................................................4200/min.
Laser Guide .......................... Class II, <1mW max, 650 nm
BLADE WRENCH
(5 mm HEX KEY)
DEPTH
ADJUSTMENT KNOB
BLADE WRENCH
STORAGE AREA
OPTIONAL RIP
GUIDE SCREW
(WING SCREW)
WIDTH OF CUT
SCALE