Ryobi P507 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
6-1/2 in., 18 VOLT CIRCULAR SAW
SCIE CIRCULAIRE 165 mm
(6-1/2 po) 18 V
SIERRA CIRCULAR 165 mm
(6-1/2 pulg.) 18 V
P507
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
INCLUDES: Circular Saw, 6-1/2 in. Blade,
Blade Wrench, Operator’s Manual
TABLE OF CONTENTS
****************
 General Power Tool Safety
Warnings .........................................2-3
 Circular Saw Safety Warnings .........3-4
 Symbols ..............................................5
 Features ..............................................6
 Assembly .........................................6-7
 Operation .......................................7-10
 Adjustments .....................................10
 Maintenance ..................................... 11
 Accessories ......................................11
 Illustrations ..................................12-14
 Parts Ordering / Service ..... Back Page
INCLUT : Scie circulaire, lame de 165 mm
(6-1/2 po), clé de lame, manuel d’utilisation
TABLE DES MATIÈRES
****************
 Avertissements de sécurité relatives
aux outils électriques ......................2-3
 Avertissements de sécurité
relatifs au scie circulaire ..................3-4
Symboles ............................................5
 Caractéristiques .................................6
 Assemblage .....................................6-7
 Utilisation .......................................7-10
 Réglages ...........................................10
 Entretien ...........................................11
 Accessoires ......................................11
 Illustrations ..................................12-14
 Commande de pièces /
réparation ..........................Page arrière
INCLUYE: Sierra circular, hoja de 165 mm
(6-1/2 pulg.), llave de la hoja, manual del
operador
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad
para herramientas eléctricas ...........2-3
Advertencias de seguridad
sierra circular ...................................3-4
Símbolos ............................................5
Características ...................................6
Armado ............................................6-7
Funcionamiento .............................7-10
Ajustes ..............................................10
Mantenimiento ..................................11
Accesorios ........................................11
 Ilustraciones ................................12-14
Pedidos de piezas /
servicio .......................... Pág. posterior
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE

Ryobi P507 Specifications

General

Type	Circular Saw
Voltage	18V
Arbor Size	5/8 inches
Weight	6.2 lbs
Max Cut Depth at 90 Degrees	2-7/16 in
Max Cut Depth at 45 Degrees	1-3/4 in
Battery Compatibility	Ryobi 18V ONE+
Blade Diameter	7-1/4 inches
Bevel Capacity	56 degrees

Summary

General Power Tool Safety Warnings

Circular Saw Safety Warnings

Cutting Procedures

Guidelines and precautions for performing cuts with the circular saw.

Kickback Causes and Related Warnings

Explains kickback causes and how to avoid them.

Additional Safety Warnings

Further important safety instructions and precautions for tool operation.

Symbols

Features

Product Specifications

Technical specifications for the circular saw, including motor, blade, and speed.

Assembly

Unpacking

Instructions for removing the product and accessories from the packaging.

Attaching the Blade

Step-by-step guide for securely attaching the saw blade.

Removing the Blade

Procedure for safely detaching the saw blade from the tool.

Installing the Battery Pack

Guide on how to insert and secure the battery pack into the saw.

Removing the Battery Pack

Instructions for safely releasing and taking out the battery pack.

Operation

Kickback

Explanation of kickback and how to avoid it during operation.

Starting and Stopping the Saw

How to safely start and stop the circular saw.

Lock-Off Button

Function and use of the lock-off button to prevent accidental starting.

Adjusting Blade Depth

Instructions for setting the correct blade depth for cuts.

Operating the Saw

General guidance and best practices for using the circular saw.

Width of Cut Scale

How to use the scale on the saw base for measuring cut width.

Bevel Cutting

Instructions and guidance for making angled cuts with the saw.

Adjusting the Bevel Setting

Steps to adjust the saw's bevel angle for desired cuts.

Making a Bevel Cut

Detailed procedure for executing a bevel cut.

Pocket Cutting

How to perform pocket cuts safely and effectively.

Adjustments

0° Bevel Stop

Information about the saw's factory-set 0° bevel stop.

Checking 0° Bevel Stop

Steps to verify the squareness of the 0° bevel stop.

Adjusting 0° Bevel Stop

How to adjust the 0° bevel stop for accuracy.

California Proposition 65

Warning regarding chemicals potentially present in the product's dust.

Maintenance

General Maintenance

Guidelines for cleaning and maintaining the tool's plastic parts.

Accessories

Information on available accessories and warnings for their use.