To Next PageTo Next Page
Need help?Do you have a question about the Ryobi PCL445 and is the answer not in the manual?
General| Type | Angle Grinder |
|---|---|
| Voltage | 18V |
| No Load Speed | 10, 400 RPM |
| Arbor Size | 5/8 inches |
| Battery Type | Lithium-Ion |
| Weight | 4.5 lbs |
| Wheel Diameter | 4.5 inches |
| Disc Diameter | 4.5 inches |
| Spindle Thread | 5/8 inches - 11 UNC |
Safety precautions for maintaining a clean and safe work environment.
Guidelines for safe electrical connections and avoiding shock hazards.
Personal protective measures and attentiveness required during operation.
Rules for handling, charging, and using battery packs safely.
Instructions for maintaining the power tool through qualified service.
General safety for specific tool applications like grinding, sanding, and polishing.
Information and precautions related to kickback hazards and prevention.
Specific safety rules for grinding operations, including guards and wheels.
Safety guidelines unique to sanding operations, disc size, and hazards.
Safety advice for polishing tasks, focusing on bonnets and attachment strings.
General safety advice covering eye/hearing protection, tool inspection, and proper use.
Indicates a potential personal injury hazard.
Advises the user to read and understand the manual before use.
Mandates wearing eye protection with side shields conforming to ANSI Z87.1.
Requires combined eye and hearing protection for certain operations.
Warns against exposure to rain or use in damp locations.
Relates to proper disposal and recycling of lithium-ion batteries.
Details the technical specifications of the angle grinder.
Instructions for safely unpacking the tool and verifying contents.
Step-by-step guide for installing and removing the wheel guard.
Procedure for correctly installing a grinding wheel onto the spindle.
Instructions for attaching the auxiliary side handle for better control.
Lists the intended uses for the angle grinder.
Guide for inserting and removing the battery pack from the tool.
Procedures for turning the tool on and off safely.
How to correctly position the guard for safe operation.
General steps and tips for using the grinder effectively and safely.
Specific instructions for cutting operations with an accessory guard.
Steps for installing and removing a cutting wheel.
Routine cleaning and care for the power tool.
Procedure for replacing a worn or damaged wheel guard.
Information on purchasing replacement parts.
Guidance on finding authorized service locations.
Contact information for customer and technical assistance.
