10
≤60˚
≥15m
(50')
10m
1
2
3
1
2
1
2
OPERATING THE PRODUCT
WARNING: Risk of electrocution! Do not
operate within 10 m of overhead electrical
power lines. Position the product at an angle
of 60° or less, depending on the specic
situation. Keep bystanders at least 15 m
away.
WARNING: Do not use the product on a
ladder or unstable support. Always cut with
both feet on solid ground to prevent being
pulled o-balance.
NOTE: To adjust the working length, unlock
the telescopic release latch. Adjust the length
of the extension pole to set the preferred
working length. Lock the telescopic release
latch to secure the extension pole.
1. Insert the battery pack until it clicks into
place.
2. Slide the trigger lock forwards and
squeeze the on/off trigger to power on
the product.
To Next Page
Loading...
