Ryobi R18PPS130 - Page 12

12
Operation
1
2
1
1
2
2
1
2
3
3
4
INSTALLING THE EXTENSION
POLE
1. Install the extension pole into the
telescopic pole coupler, and tighten the
coupler.
2. Connect the pruner attachment into the
extension pole coupler, and tighten the
coupler.
WARNING: Do not use more than one
extension pole at any time.
3. Unlock the telescopic release latch.
Adjust the length of the telescopic pole
to the preferred working length. Lock the
telescopic release latch.
WARNING: Always use two hands to operate
the product. Hold the product with one hand
on the front handle and the other hand on the
rear handle of the powerhead.
4. Use the product with the attached
extension pole.