Ryobi R36LTR10 - Page 8

8
Getting started
1
2
3
4
3
4
1
2
1
5
2
Always wear full eye, ear and head
protection, appropriate respiratory
mask, non-slip heavy-duty gloves, and
substantial footwear while operating
the product. Do not operate the
product when barefoot or wearing open
sandals.
Push the lock button and remove the hanger cap from the lower shaft. Insert and
turn the lower shaft into the upper shaft until the lock button clicks into place. Turn
the knob clockwise to secure the lower shaft.
Place the front handle at the preferred position on the upper shaft. Align and insert the bolt through the holes under the front
handle. Place the nut on the bolt, and turn the nut clockwise to tighten and secure the front handle.
1
2
8
Press and hold the lock-out trigger, and
squeeze the on/off trigger to power on
the product.