Ryobi RACPWS3 - Operation: Fixed or Rotary Brush; Brush Attachment and Operation

13
Operation
1
2
1
2
1
2
1
2
1
2
3
1
2
3
USING THE FIXED OR ROTARY
BRUSH
1. Turn the on/off switch to the off position.
Set the trigger handle lock to the lock
position.
2. Insert the the xed or the rotary brush into
the spray angle. Turn the fixed or rotary
brush until it clicks into place.
3. Turn the on/off switch to the on position.
Set the trigger handle lock to the unlock
position. Squeeze the trigger to operate
the product.
NOTE: Water flows out when the trigger
is squeezed.