Ryobi RACPWS3 - Operation: Using the Turbo Lance; Turbo Lance Setup and Safe Use

12
Operation
1
2
1
2
1
2
3
1
2
3
USING THE TURBO LANCE
WARNING: Do not point the lance towards
people, animals, live electrical equipment, or
the product.
1. Set the trigger handle lock to the lock
position.
2. Insert the turbo lance into the trigger
handle. Turn the lance until it clicks into
place.
NOTE: Slide the spray angle lock button
outward or inward to lock or unlock the
turbo lance or rotary brush from the spray
angle.
3. Turn the on/off switch to the on position.
Set the trigger handle lock to the unlock
position. Squeeze the trigger to operate
the product.
NOTE: Water flows out in a rotating
pattern when the trigger is squeezed.
1
2