To Next PageTo Next Page
Need help?Do you have a question about the Ryobi RAP200 and is the answer not in the manual?
Lists components 1-7 of the paint station, including pump, lever, hook, sprayer hook, paint container.
Instructions for using 3-wire extension cords with grounding plugs and proper sizing.
Details on connecting the electric motor to a 230 V, 50 Hz AC power supply.
Guidelines for proper grounding to reduce the risk of electric shock.
Lists necessary tools: adjustable wrench and 2 mm hex key.
Step-by-step instructions for attaching the wheels to the base.
How to raise and lower the handle for operation and storage.
Steps for connecting the high pressure hose to the station and sprayer.
Instructions for fitting the spray tip and nozzle guard onto the sprayer.
Steps for assembling the paint roller onto the roller head.
How to lock the sprayer trigger to prevent accidental discharge.
Steps to follow to shut down the unit and release pressure safely.
Instructions for thoroughly flushing the system before first use or color change.
Steps for priming the pump and sprayer before starting any spraying.
Guide to choosing the correct spray tip based on hole size and fan width.
Information on how worn spray tips affect performance and replacement intervals.
Instructions for proper spraying technique, surface preparation, and settings.
Tips for achieving an even spray pattern and proper stroke technique.
How to use the paint roller attachment with the sprayer.
Instructions for storing the paint station overnight for water-based materials.
Procedures for cleaning the paint station and sprayer after use.
Steps to clean the paint roller attachment after use.
Detailed steps for cleaning the filter within the pistol-grip sprayer.
Recommendations for storing the paint station for extended periods.
General| Brand | Ryobi |
|---|---|
| Model | RAP200 |
| Category | Paint Sprayer |
| Language | English |
