3
ENGLISH
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME EXPLANATION
Safety Alert Precautions that involve your safety.
Read the Operator’s
Manual
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Wear Eye and Hearing
Protection
Wear eye and hearing protection which is marked to comply with
standards when operating this equipment.
Keep Bystanders Away Keep all bystanders at least 15m away.
Ricochet
Thrown objects can ricochet and result in personal injury or property
damage.
No Blade
Do not install or use any type of blade on a product displaying this
symbol.
Tri-Arc blade
Tri-Arc blade is appropriate for this unit and is suited for cutting pulpy
weeds and vines.
Do not use toothed blade This unit is not intended for use with a toothed saw type blade.
RPM Decal
Rotational direction and maximum speed of the shaft for the cutting
attachment.
Boots Wear non-slip safety footwear when using this equipment.
Gloves Wear non-slip, heavy-duty gloves.
No Smoking Do not smoke when filling fuel tank.
Petrol
Use unleaded petrol intended for motor vehicle use with an octane
rating of 87([R+M]/2) or higher.
Lubricant
Use quality 4-Stroke engine lubricant. For general, all temperature
use, SAE 10W-30 is recommended.
Switch
On/Off Switch
I = On to Run
O = OFF to Stop
Run position.
Start/Choke position.
RUN
START
RBC430SES/SBS manual(TTIA).indd Sec2:3RBC430SES/SBS manual(TTIA).indd Sec2:3 09-9-23 5:2509-9-23 5:25
To Next Page
Loading...
