4
ENGLISH
SYMBOL NAME EXPLANATION
Half choke position (For cold conditions. See troubleshooting).
Do not depress throttle trigger while starting.
Place the engine switch to the “on” (I) position
PRIME - press the primer bulb 10 times slowly
SET the choke lever to the “START” position
PULL the starter rope with a quick firm and consistent upward
motion until the engine starts.
Note: If difficulties with starting are experienced (this may occur in
colder conditions) refer to troubleshooting section in this manual.
Allow engine to warm up for 5-20 seconds.
Squeeze the throttle trigger to run.
Note: Squeezing the throttle trigger releases the start lever to the
RUN position.
To stop the unit: Place the engine switch to the “O” position
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER:
Indicates an imminently hazardous situation, which, if not avoided,
will result in death or serious injury.
WARNING:
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury.
CAUTION:
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
To Next Page
Loading...
