2
1
1
2
2
1
1
1
INSTALLING THE MULCH PLUG
1. Remove the metal frame lock of the
grass catcher from the slots on the
product. Remove the grass catcher from
the product.
2. Insert the metal frame lock of the
mulching plug into the slots on the
mower. Insert the mulching plug into the
rear discharge chute.
NOTE: Make sure that the slot is clear of
debris, grass, and dirt, and that the metal
frame lock is fully seated into the slot.
The product does not start if the lock is
not fully seated.
16
To Next Page
Loading...
