2
1
1
2
2
1
1
1
INSTALLING THE GRASS CATCHER
1. Lift the handle of the mulch plug, and pull
out the plug from the rear discharge chute.
2. Insert the metal frame lock of the grass
catcher into the slots on the product.
Align the grass catcher with the rear
discharge chute, and make sure that the
catcher fully covers the chute.
NOTE: Make sure that the slot is clear of
debris, grass, and dirt, and that the metal
frame lock is fully seated into the slot.
The product does not start if the lock is
not fully seated.
17
To Next Page
Loading...
Need help?
General
