Ryobi RLM36BL - Cutting with Easy Edge; Easy Edge Cutting Feature; Adjusting the Cutting Height; Cutting Height Adjustment

15
OPERATION
A
+
or
B
B
A
A
B
15˚Max.15˚
2
4
3
1
2
1
OPERATING THE PRODUCT
WARNING: Avoid holes, ruts, bumps, rocks,
property stakes, or other hidden objects.
WARNING: Do not operate the product on
inclines greater than 15°. Mow across the
face of slopes, never up and down.
1. Open the battery door. Insert the battery
pack into the product. Make sure that the
latche on each side of the battery pack
clicks in place, and that the battery pack
is secured in the product before use.
Insert the isolator key. Close the battery
door.
NOTE: The product will not start without
the isolator key. Ensure that the isolator
key is inserted into the product.
2. Press and hold down the start button,
then squeeze and hold either side of
the on/o󰀨 lever. Release the start button
and keep holding the on/o󰀨 lever to keep
using the product.
NOTE: The on/o󰀨 lever must be
continuously held during use. Release
the on/o󰀨 trigger to stop the product.