Ryobi RLM36BL - Maintenance; Cleaning the Product

18
OPERATION
3
4
2
1
1
2
REPLACING THE BLADE
NOTE: For a quality nish to your lawn,
replace the mowing blade every season.
1. Open the battery door. Remove the
isolator key and battery pack. Close the
battery door.
2. Tilt the product on its side so that the
blade is vertical.
3. Clean away debris before changing the
blade.
4. Loosen the nut using 15 mm spanner.
NOTE: Use a wood chock to stop the
blade from spinning during loosening
and tightening.
3
1
2
4