Ryobi RLM36BL - Replacing the Blade; Blade Installation

17
OPERATION
CUTTING WITH EASY EDGE
EASY EDGE allows the product to easily
cut the grass along walls or the edge of your
lawn.
NOTE: EASY EDGE pulls grass towards the
blade when the product is running along a
wall or the edge of your lawn.
2
1
3
4
5
2
1
3
4
5
2
1
3
4
5
ADJUSTING THE CUTTING HEIGHT
To adjust the deck height, pull the cutting
height adjustment lever towards the wheel,
then raise or lower the deck to the preferred
height. Make sure that the lever is always
secured into one of the ve height slots.
NOTE: The cutting height can be adjusted
to 5 positions. Cutting heights may vary in
particular products. Start the mower at the
highest position, before cutting the grass.