Ryobi RLP1813 - Operation; Operating the Lopper

12
1
2
3
3
2
32mm 28mm
1
OPERATION
NOTE:The lopper has a 32 mm cutting
capacity for softwood, and 28 mm cutting
capacity for hardwood.
OPERATING THE LOPPER
NOTE: During operation, hold the product
with both hands.
1. Remove the blade sheath.
2. Install the hook.
3. Install the battery pack in the product.
Make sure the latches on each side of
the battery pack snap in place and that
the battery pack is securely attached
before using the product.