PRODUCT SPECIFICATIONS
Multi-tool
Model RMT300
Input 300 W
Voltage 230 V
50 Hz
No-load speed
10000 - 20000
min
-
1
Oscillation angle 3.2 º
Cord length 2.5 m
Weight
(According to EPTA-Procedure 01/2003)
1.43 kg
Measured sound values determined according to EN 62841:
A-weighted sound pressure level L
pA
= 87.0 dB(A)
Uncertainty K 3 dB
A-weighted sound power level L
WA
= 98.0 dB(A)
Uncertainty K 3 dB
Wear ear protectors.
The vibration total values (triaxial vector sum) determined according to EN 62841:
Vibration emission level:
Sanding with sanding pad a
h
= 3.4 m/s
2
Uncertainty K 1.5 m/s²
Cutting with 1/16” grout blade a
h
≤ 2.5 m/s
2
Uncertainty K 1.5 m/s²
Cutting with 88-mm fl ush cut blade a
h
= 3.1 m/s
2
Uncertainty K 1.5 m/s²
Cutting with 28-mm plunge cut blade a
h
= 3.2 m/s
2
Uncertainty K 1.5 m/s²
Scrapping with 45-mm scraper blade a
h
= 3.5 m/s
2
Uncertainty K 1.5 m/s²
VIBRATION LEVEL
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of
exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may
signifi cantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signifi cantly reduce the exposure level over the total working
period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation of work patterns.
To Next Page
Loading...
