Lifts or lowers the blade deck and the-
here are 4 possible height adjustments. Th
lever to the required position.
When the button is released, the lever remains in
the selected position.
Cutting heights: see technical data table.
BLADE ROTATION ENGAGEMENT LEVER
starts or stops blade rotation.
- Blade engaged
- Blade disengaged
conditions, the engine switches off if it is running,
or else cannot be started.
6 Machine safety
If the machine has not been used for a long time,
order to be able to start and use the machine sa-
SAFETY SYSTEM OPERATION CHECK
-
cated in paragraph 6. Make sure that to each
operation corresponds the indicated effect.
DRIVE / SPEED CHANGE LEVER (18)
- Selects machine forward/reverse movement.
This lever has 6 positions, corresponding to 4
forward gears
, neutral position "N" and
reverse gear "R".
- To switch from one gear to another, at mid stroke
lever to the required position.
-
Rotation to "START" position – automatic
engine start.
"I" position .
If returned to position – switches off en-
gine.
move the
Engine with power start also feature ca-
ble start.
Reduced or
increases engine revs.
engine minimum speed
engine top speed
(15)
By giving the handle a good pull, the engine
starts. After pulling, re-accompany the handle
into its housing to facilitate automatic cable
rewinding.
To Next Page
Loading...
