Ryobi ROM-65P - Emptying the Grass Bag

- 26 -
In case of blockages and drops in engine speed,
engage a lower gear and further raise the blade
deck.
-
ater cutting height to prevent the blade knocking
ing damage to the blade and mechanical parts.
CAUTION When cutting on slopes, redu-
conditions.
has to be overcome.
The blade must be in perfect condition and
The engine must be used at top speed, both to
ensure a clean cut of the grass and to achie-
ve good ejection of the cut grass through the
unloading pipe.
levels so as not to damage the lawn.
-
OPERATING TIMES AND DAYS
The time of operation of the lawnmower could be
-
-
ver short distances.
- For longer distances, use a transport vehicle fe-
aturing loading ramps.
in neutral.
- Do not lift using cables.
-
sport.
CAUTION
ON
gra
d
ua
l
to prevent su
dd
en engagement
o
f
the drive causing the vehicle to jump
EMPTYIN
G
T
H
E
G
RA
SS
BA
G
I
f
the cut grass remains on the ground, this means
t
he grass bag is full:
1
2
-
k
e.
5
6
prevent blade engagement.
CLEANING T
H
E GRASS UNLOADING PIPE
C
AUTI
ON
performed with the engine switched off
G
rass could block the pipe due to
:
P
roceed as follows:
1
O
perate the parking brake.
2
Disengage blade rotation
.
L
ift the blade deck as far as it will go.
5 Release the ba
g.
Remove the accumulated grass from the rear
part o
f
the pipe.
CUTTING SUGGESTION
S
-
Wh
en a
dj
ust
i
ng t
h
e cutt
i
ng
h
e
i
g
h
t an
d
mac
hi
ne
s
peed, be care
f
ul not to overstress the machine
.
For problem-free use, the cutting height and the
movement speed must be adapted to the height
t
he grass to be cut.
Move to the cut grass emptying / storage area.
Disengage the cutting blade.
Pull out the bag overturning rod (fig.44-45).
1
2
1
2
5
6
-