20
PROBLEM POSSIBLE CAUSE SOLUTION
The auger
attachment
turns at idle.
Idle speed is set
too high.
Gearbox clutch
is inoperable.
Turn the idle speed screw counter clockwise to reduce
the idle RPM and stop the auger attachment.
Contact a service dealer for adjustment and
discontinue use until the repair is made. Serious
personal injury may result from the auger attachment
turning at idle.
Oil drips from
muffl er.
Check oil / fuel
mixture.
Air filter dirty.
Use fresh fuel and the correct synthetic 2-stroke oil
mix.
Clean per instruction in Maintenance Section.
To Next Page
Loading...
