Ryobi RPP720 - SYMBOLS AND SPECIFICATIONS; SYMBOLS EXPLANATION; PRODUCT SPECIFICATIONS

2
ENGLISH
SYMBOLS
SYMBOL EXPLANATION
V Voltage
A Current
Hz Frequency(cycles per second)
W Power
hrs Time
n
o
Rotational speed, at no load
double-insulated construction
.../min Revolutions, strokes, surface speed, orbits etc., per minute
Warning
Read the instruction manual
Don’t expose to moisture
Disconnect the mains plug if the cord is damaged or entangled
Keep bystanders away, be aware of the falling objects
Electrical hazard , at least 15m away from the overhead lines
Wear non-slip, heavy-duty protective gloves when handing the pole saw and the blade.
Wear the helmet to ear
15m
SPECIFICATIONS
Voltage :.............................................................220~240V
Power : ....................................................................720 W
Bar Length : ..................................................20 cm/ 8 inch
Chain Pitch :..............................................10mm/ 3/8 inch
Chain type : ............... Low Profile Skip Tooth Narrow Kerf
Weight : .................................................................. 3.85kg
Measured sound power level : ............................89 dB(A)
Guaranteed sound power Level : ......................105 dB(A)
Vibration level : ...................................................2,44 m/s²
DESCRIPTION
Fig.1
1. Cord Retainer
2. Back Handle
3. Lock-off Button
4. Shoulder Strap
5. Handle Grip
6. Telescoping Pole
7. Oil Cap
8. Blade Cover