Ryobi RRT4 - Accessory Guide; Accessory Overview

13
Original Instructions
ACCESSORY
Figure Accessory Application
Maximum
RPM*
Drum sander mandrel (Ø
6.4 mm)
(Ø 3.2 mm shank/collet)
Holding sanding
drums
35,000
6.4 mm x 12.7 mm sanding
drums (60 grit, 120 grit)
used with Drum sander
mandrel
Sanding wood,
metal, and plastics
35,000
9.5 mm Conical grinding
stone
9.5 mm Cylinder grinding
stone
Sharpening and
deburring metals,
steel, and rust
35,000
3.2 mm engraving bit
Engraving metal,
wood, and plastics
35,000
3.2 mm Screw mandrel
Holding polishing
wheels
15,000
12.7 mm & 25.4 mm
Felt polishing wheels
used with Screw mandrel
Polishing and
buffing metals,
stone, glass, and
ceramics
15,000
Wire brush wheel
Cleaning and
deburring metal,
rust, and paint
15,000
Wrench
Removing and
inserting quick-
change collet
—
Polishing compound
Polishing metal
and plastic, used
with felt polishing
wheels
—
*The maximum RPM provided in the chart are recommended values only.