Page 1 of 3 RTS20 12-10-10
Service Level
Ryobi Technologies, Inc.
Anderson, South Carolina 29625
SERVICE INFORMATION
Product: Ryobi Table Saw
Identification: Model RTS20
Condition: A design improvement was made changing certain parts of the bevel
locking lever assembly.
Remedy: When model RTS20 is in for any repair service, inspect the saw for updated
bevel locking lever parts. Updated parts can be easily identified by a compression
spring located on the locking lever screw. If parts are original and have not been
changed, order and replace parts as indicated. (see Fig 1, 2, and 3)
Old part: New part:
Wave Washer, no longer needed Spring, #089037008208
Bevel Bushing (without step) Bevel Bushing, part #089037008209
Pad, part #089037008040 Pad, part #089037008040 (thicker)
Outer washer, no longer needed
Mandatory Service
Information
To Next Page
