Ryobi RTS22 User Manual

SAVE THIS MANUAL FOR FUTURE REFERENCE
The saw has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
10 in. TABLE SAW
SCIE À TABLE de 254 mm (10 po)
SIERRA DE MESA de 254 mm (10 pulg.)
RTS22/RTS22T
Cette scie a été conçue et fabriquée conformément aux strictes
normes de fiabilité, simplicité d’emploi et sécurité d’utilisation.
Correctement entretenu, cet outil vous donnera des années de
fonctionnement robuste et sans problème.
AVERTISSEMENT : Pour réduire les risques de
blessures, l’utilisateur doit lire et veiller à bien comprendre le
manuel d’utilisation avant d’employer ce produit.
Su sierra ha sido diseñado y fabricado de conformidad con
nuestras estrictas normas para brindar fiabilidad, facilidad de uso
y seguridad para el operador. Con el debido cuidado, le brindará
muchos años de sólido funcionamiento y sin problemas.
ADVERTENCIA: Para reducir el riesgo de lesiones,
el usuario debe leer y comprender el manual del operador antes
de usar este producto.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS

Ryobi RTS22 Specifications

General

Type	Table Saw
Weight	54 lb
No Load Speed	5000 RPM
Blade Diameter	10 inches
Arbor Size	5/8 inches
Max Cut Depth at 45°	2-1/4 inches
Bevel Capacity	0-45°

Summary

General Safety Rules

Specific Safety Rules

Symbols

Electrical Information

Extension Cords

Guidance on selecting and using extension cords for safe operation.

Grounding Instructions

Explains the importance and procedure for grounding the tool to prevent shock.

Glossary of Terms

Features and Specifications

Product Specifications

Details key technical specifications like blade arbor, diameter, tilt, and capacity.

Tools Needed

Loose Parts

Assembly Instructions

Unpacking and Preparation

Steps for unpacking the saw and preparing for assembly, including mounting.

Leg Stand Assembly

Detailed instructions for assembling the saw's leg stand.

Component Installation

Guide for installing wheels, handle, and sliding table assembly.

Riving Knife and Blade Guard Setup

Instructions for setting up the riving knife and installing the blade guard.

Blade Alignment Check

Procedure to check and align the riving knife and saw blade.

Moving and Storing the Saw

Instructions on how to move and store the table saw.

Operation

Basic Operation and Kickback Avoidance

Covers fundamental table saw operation and preventing hazardous kickback.

Types of Cuts Overview

Introduces the various types of cuts the table saw can perform.

Adjusting Blade Depth and Angle

Explains how to set the blade's cutting depth and bevel angle.

Using the Rip Fence

Instructions on how to properly use the rip fence for guiding cuts.

Using the Miter Gauge

Guide on utilizing the miter gauge for accurate angled cuts.

Performing Common Cuts

Step-by-step guides for performing cross cuts, rip cuts, and dado cuts.

Adjustments

Replacing the Blade

Step-by-step guide for safely removing and installing a new saw blade.

Setting the Blade at 0° and 45°

Instructions for accurately setting the blade to 0° and 45° angles.

Checking Rip Fence Alignment

Procedure to verify and adjust the rip fence's parallel alignment to the blade.

Checking Rip Fence Locking Lever

Ensures the rip fence locking lever functions correctly and securely.

Maintenance

General Maintenance

Routine cleaning and care instructions for the table saw.

Cleaning Riving Knife Lock Lever

Guide for cleaning debris from the riving knife lock mechanism.

Troubleshooting

Service and Support