4 – English
PRODUCT SPECIFICATIONS
Max. Drill Speed .................................................. 2,800/min
Flow rates ......2,800 RPM: 10 GPM / 2,000 RPM: 8.5 GPM
Max Head Height ........................................................ 35 ft.
UNPACKING
This product requires assembly.
Carefully remove the tool and any accessories from the
box. All items listed in the Includes section must be
included at the time of purchase.
WARNING:
Items in this Assembly section are not assembled to
the product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possible serious personal injury.
PACKING LIST
Drill Pump
3 ft. Intake Hose
Max Lift Height ............................................................ 10 ft.
Inlet/Outlet Connection ............................ 3/4 in. GHT male
FEATURES
ASSEMBLY
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Direct Current Type or a characteristic of current
Class VI Tool DOE certification
To Next Page
Loading...
