Need help?Do you have a question about the Ryobi RY36C17A and is the answer not in the manual?
General| Power source type | AC |
|---|---|
| Power protection features | Overcharge |
| Number of batteries supported | 1 |
| Compatible battery technologies | Lithium-Ion (Li-Ion) |
| Polarity reverse circuit protection | Yes |
| Quantity per pack | 1 pc(s) |
| Product color | Green |
| Output voltage | 36 V |
| Batteries included | No |
Specifies the charger's intended purpose and compatible battery packs, suitable for indoor use only.
Provides critical safety instructions, including warnings against recharging primary cells and using damaged products.
Details the process of charging battery packs, including initial charge and handling of hot battery packs.
Step-by-step instructions for charging a battery pack that is at normal room temperature.
Guidance on cooling down a hot battery pack for approximately 30 minutes before recharging.
Instructions for product maintenance, including cleaning the charger surface and avoiding solvents.
Recommendations for storing the charger in a cool, dry place between 10°C and 38°C.
Identifies key components of the RY36C17A charger and refers to illustrative figures.
Explanation of symbols used on the product to ensure safe and proper operation.
Technical details of the charger, including battery compatibility, capacity, and maximum charging times.
Details the meaning of different LED indicators on the charger and their corresponding actions.
Explains the LED status lights on the battery pack and their indication of charge level or status.
Outlines the terms, duration, and exclusions of the RYOBI product warranty.
Provides contact information for authorised service centres for product repair and support.
To Next Page
