PRODUCT SPECIFICATIONS
Cordless Line Trimmer
Model RY36LT33A / RY36LT33A-120
Voltage 36V d.c.
No-load speed 6,400 – 7,400 min-1
Cutting line diameter 2.0 mm
Cutting capacity 28-33 cm
Vibration level (in accordance with EN 50636-2-91:2014 Annex
CC)
Rear handle 1.9 m/s
2
Front handle 5.2 m/s
2
Uncertainty of measurement 1.5 m/s
2
Noise emission level (in accordance with EN 50636-2-91:2014
Annex CC)
A-weighted sound pressure
level at operator’s position
84.3 dB(A)
Uncertainty of measurement 2.5 dB
A-weighted sound power level 93.6 dB(A)
Uncertainty 2.5 dB
Weight (with harness, without
battery and charger)
2.8 kg
Weight (with harness, with
heaviest battery pack)
5.6 kg
Maximum weight (with harness,
battery, and charger)
5.0 kg
BATTERY AND CHARGER
Model RY36LT33A RY36LT33A-120
Battery pack - BPL3626D2
Weight - 1.43 kg
Charger - RY36C17A
Compatible battery
packs
BPL3615, BPL3626, BPL3626D2,
BPL3640, BPL3626D, BPL3640D,
BPL3640D2, BPL3650D, BPL3650D2
Compatible charger
BCL3620, BCL3620S, BCL30F,
RY36C17A, RY36C60A
REPLACEMENT PART
Complete spool
RAC102, RAC103, RAC133, RAC142,
RAC143
VIBRATION LEVEL
The declared vibration value has been measured with a
standard test method and may be used to compare one
tool with another.
The declared vibration value may be used in a preliminary
assessment of exposure.
The vibration emission during actual use of power tool can
differ from the declared total value depending on the ways
in which the tool is used.
Identify safety measures to protect yourself based on an
estimation of exposure in the actual conditions of use,
taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it is
running idle in addition to the trigger time.
To Next Page
Loading...
