Ryobi RY40301 - User Manual

To Next Page

OPERATOR’S MANUAL

MANUEL D’UTILISATION

MANUAL DEL OPERADOR

40 VOLT BACKPACK

SPRAYER

PULVÉRISATEUR À DOS DE 40 V

ROCIADOR CON MOCHILA DE 40 V

RY40301

WARNING: To reduce the

risk of injury, the user must read and

understand the operator’s manual

before using this product.

TABLE OF CONTENTS

 Important Safety Instructions ..............2

 Specific Safety Rules ...................... 3-4

 Symbols ..............................................5

 Features ..............................................6

 Assembly ........................................ 6-7

 Operation ...................................... 7-10

 Maintenance ............................... 10-11

 Parts Ordering/Service ........ Back Page

AVERTISSEMENT : Pour

réduire les risques de blessures,

l’utilisateur doit lire et veiller à bien

comprendre le manuel d’utilisation

avant d’employer ce produit.

TABLE DES MATIÈRES

 Instructions importantes

concernant la sécurité ........................2

 Règles de sécurité particulières ...... 3-4

 Symboles ............................................5

 Caractéristiques ..................................6

 Assemblage .................................... 6-7

 Utilisation ...................................... 7-10

 Entretien ...................................... 10-11

 Commande de pièces/

réparation .......................... Páge arrière

ADVERTENCIA: Para reducir

el riesgo de lesiones, el usuario debe

leer y comprender el manual del

operador antes de usar este producto.

ÍNDICE DE CONTENIDO

 Instrucciones de seguridad

importantes .........................................2

 Reglas de seguridad específicas .... 3-4

 Símbolos .............................................5

 Características ....................................6

 Armado ........................................... 6-7

 Funcionamiento ............................ 7-10

 Mantenimiento ............................ 10-11

 Pedidos de piezas/

servicio ........................... Pág. posterior

SAVE THIS MANUAL FOR

FUTURE REFERENCE

CONSERVER CE MANUEL

POUR FUTURE RÉFÉRENCE

GUARDE ESTE MANUAL

PARA FUTURAS CONSULTAS

Need help?

Do you have a question about the Ryobi RY40301 and is the answer not in the manual?

The RYOBI 40V Backpack Sprayer (RY40301) is a battery-powered tool designed for applying various liquids, primarily consumer-grade home and garden chemicals such as insecticides, fungicides, weed killers, and fertilizers. It offers pump-free spraying, ensuring continuous fluid circulation through the tank.

Function Description:

This backpack sprayer is designed for efficient and convenient application of liquid solutions. It features a trigger handle with a lock-on function for continuous spraying, reducing user fatigue during extended use. The sprayer's battery-powered pump eliminates the need for manual pumping, maintaining consistent pressure for even application. It is suitable for both household and outdoor use, with a strong emphasis on safety during operation and maintenance. The design allows for targeted or broadcast spraying depending on the chosen nozzle.

Important Technical Specifications:

Tank Capacity: 4 gallons (15.1 liters)
Power Input: 40 Volt DC
Spray Pressure: Up to 90 PSI

Usage Features:

Adjustable Spray Nozzles: The sprayer comes with four different nozzles:
- Fan Nozzle: Provides a flat spray for broadcast applications, covering a wide area.
- Cone Nozzle: Adjusts the flow from a stream to a cone spray, ideal for targeted spraying. This nozzle comes pre-attached to a 45° elbow.
- Dual Nozzle: Offers maximum coverage for larger areas.
- Shower Nozzle: Delivers a saturated spray. Each nozzle can be used with or without the 45° elbow for versatility.
Pump-Free Spraying: The integrated battery-powered pump continuously cycles fluid through the tank, eliminating manual pumping and ensuring consistent spray pressure.
Graduated Tank: The tank is clearly marked for measuring up to 4 gallons of liquid, aiding in accurate mixing and filling.
Trigger with Lock-On: The trigger can be locked in the "on" position for continuous spraying, which is useful for covering large areas and reduces strain on the user's hand.
Battery Pack Installation/Removal: The battery pack is easily installed by aligning its raised rib with the groove in the battery port and secured by a latch. Removal is done by depressing the latch.
Operation Control: A control knob allows the user to turn the sprayer ON/OFF and adjust the liquid pressure. Turning it clockwise increases pressure, while counter-clockwise reduces it.
Spraying Technique: For optimal results, it is recommended to spray on dry surfaces using long, even, overlapping strokes. On windy days, spraying should be avoided to prevent accidental drift onto unintended plants or objects. Spraying should always be directed downwind and away from people or animals.
Filling the Tank: Before filling, the battery pack must be removed, and the battery cover closed. Spills should be wiped up immediately to prevent electric shock or corrosive liquids from entering the battery pack. The tank should not be overfilled, and liquids used must be as thin as water for proper spraying.
Environmental Considerations: The sprayer should be used in well-ventilated areas and stored indoors in a secure, well-ventilated space with an empty fluid tank. It should not be exposed to rain, water, or liquids.

Maintenance Features:

Thorough Cleaning After Each Use: It is crucial to clean the unit thoroughly after each use to prevent moving parts and connectors from seizing up due to liquid residue.
Draining the Tank: Any remaining liquid in the tank should be drained before cleaning. This involves removing the battery pack, unscrewing the cap, removing the strainer, and draining the contents through the fill area. Chemical SDS sheets should be consulted for proper disposal and storage of chemical solutions.
Cleaning the Sprayer, Tank, and Spray Lines: The tank should be filled about one-third full with clean water, and a small amount of mild household detergent can be added. Flammable or abrasive cleaning agents should never be used. After refilling, the sprayer should be operated until the tank is empty, directing the spray toward an area that will not be damaged. This rinsing process may need to be repeated.
Cleaning Nozzles and 45° Elbow:
- Nozzles: Remove the battery pack, unscrew the nozzle from the spray wand or elbow. Use a fine needle to clear any foreign materials. Back-flush with a garden hose (running water backward through the nozzle) to remove debris.
- Elbow: Remove the battery pack, and if installed, unscrew the nozzle. Push a small wire through the cross holes to clear debris, and rinse with clean water if necessary.
Replacing Seals: Over time, seals can harden and crack, leading to leaks. A set of replacement seals is included with the sprayer. Users should refer to the manual for seal locations and replace them as needed. Before replacing seals, the tank must be drained and cleaned, and rubber gloves should be worn when handling chemicals.
General Maintenance: Avoid using solvents on plastic parts, as most plastics are susceptible to damage. Clean cloths should be used to remove dirt, dust, oil, and grease. Brake fluids, gasoline, petroleum-based products, or strong solvents should never come into contact with plastic parts, as they can cause damage and potential injury.
Pre-Use Inspection: Before each use, the entire product should be inspected for damaged, missing, or loose parts (screws, nuts, bolts, caps, etc.). All fasteners and caps should be tightened securely. The product should not be operated if any parts are missing or damaged.
Storage: The sprayer should be stored indoors in a dry, high, or locked-up place, out of reach of children. It should be stored in an upright position, not on its side.
Battery Pack Care: Batteries should not be exposed to fire or excessive heat (above 130°C/265°F). Avoid crushing, dropping, or damaging the battery pack. If liquid leaks from the battery, avoid contact with skin and eyes; flush with water immediately and seek medical attention if necessary.
Chemical Handling: Always follow the chemical manufacturer's instructions, Safety Data Sheets (SDS), and EPA Master Label guidelines for use, cleaning, and storage. Never combine chemicals.
Safety Equipment: Always wear eye protection with side shields (ANSI Z87.1 compliant) and breathing protection (face or dust mask) when mixing, filling, spraying, and cleaning. This protects eyes, skin, and lungs from chemical exposure.