Ryobi RY40505 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
16 in. 40 VOLT BRUSHLESS CHAIN SAW
SCIE À CHAÎNE SANS BALAI DE 40 V DE 40,6 cm (16 po)
MOTOSIERRA SIN ESCOBILLAS DE 40,6 cm (16 pulg.), 40 V
RY40505/RY40505VNM
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
TABLE OF CONTENTS
 General Power Tool Safety Rules .... 2-3

Chain Saw Safety Warnings ............ 3-7

Symbols .......................................... 8-9

Glossary of Terms .............................10

Features ...................................... 11-12

Assembly .................................... 12-13

Operation .................................... 13-22

Maintenance ............................... 23-29

Bar and Chain Combinations ............ 30

Troubleshooting ................................30

Parts Ordering/Service ........ Back Page
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
TABLE DES MATIÈRES
 Avertissements règles de sécurité
relatives aux outils électriques
........ 2-3

Avertissements de sécurité
relatifs au scie à chaîne
................... 4-8

Symboles ...................................... 9-10

Glossaire ...........................................11

Caractéristiques .......................... 12-13

Assemblage ................................ 13-14

Utilisation .................................... 14-24

Entretien ...................................... 25-31

Combinaisons de guide et chaîne ....32

Dépannage ........................................ 32

Commande de pièces/
réparation
.......................... Páge arrière
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
ÍNDICE DE CONTENIDO
 Advertencias de seguridad
para herramientas eléctricas
........... 2-3
 Advertencias de seguridad
de la motosierra
.............................. 4-8
 Símbolos ....................................... 9-10
 Glosario de términos ......................... 11
 Características ............................ 12-13
 Armado ....................................... 13-14
 Funcionamiento .......................... 14-25
 Mantenimiento ............................ 25-32
 Combinaciones de barra y cadena ...33
 Correción de problemas ...................33
 Pedidos de piezas/
servicio
........................... Pág. posterior
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS

Ryobi RY40505 Specifications

General

Brand	Ryobi
Model	RY40505
Category	Chainsaw
Language	English

Summary

General Power Tool Safety Rules

Work Area Safety

Rules for maintaining a safe working environment, including lighting and avoiding hazards.

Electrical Safety

Precautions related to electrical hazards, grounding, cords, and GFCI use.

Personal Safety

Guidelines for operator alertness, PPE, preventing unintentional starting, and proper attire.

Power Tool Use and Care

Advice on using the correct tool for the job and avoiding forcing the tool.

Battery Tool Use and Care

Instructions for charging and using battery packs safely and correctly.

Service

Guidance on obtaining professional servicing and using specified replacement parts.

Chain Saw Safety Warnings

Causes and Operator Prevention of Kickback

Explains kickback and provides precautions to avoid it, including grip and stance.

Understanding Your Chain Saw Safety Devices

Explains safety features like low kickback chain and guide bars.

Features

Product Specifications

Lists technical specifications like motor type, bar length, and oil capacity.

Know Your Chain Saw

Introduces the importance of understanding the tool and manual for safe operation.

Major Features Overview

Details key components such as lock-out button, chain tensioning, and guide bar.

Assembly

Unpacking and Inspection

Procedures for unpacking, inspecting for damage, and verifying contents.

Packing List

Lists the items included with the chain saw for verification.

Assembly Safety Warnings

Crucial safety warnings to prevent injury during assembly and modification.

Operation

Applications and Safety Precautions

Lists intended uses and initial safety warnings for operation.

Battery Pack and Chain Lubrication

Procedures for installing/removing battery and maintaining bar/chain lubrication.

Chain Brake Operation

Instructions for checking and operating the chain brake mechanism.

Starting, Stopping, and Gripping

Guides on how to start, stop, and properly grip the chain saw.

Cutting Stance and Technique

Details proper cutting stance and basic procedures for effective use.

Work Area Precautions and Tree Felling

Precautions for the work area and the process of felling trees.

Felling Procedures

Specific steps for felling trees, including notches and backcuts.

Bucking Techniques

Instructions for cutting a fallen tree into logs of desired lengths.

Bucking Logs Under Stress

Specific techniques for cutting logs that are under tension or stress.

Limbing and Pruning

Procedures for removing branches from trees, including safety.

Springpoles Safety

Warnings and precautions for handling dangerous springpoles.

Maintenance

General Cleaning and Safety

General maintenance advice, cleaning tips, and safety warnings.

Replacing Bar and Chain

Safety guidelines and overview for replacing the guide bar and saw chain.

Adjusting Chain Tension

Detailed steps for correctly tensioning the saw chain for optimal performance.

Chain Tension and Maintenance

Information on checking chain tension, wear, and general chain upkeep.

Sharpening Chain Cutters

Instructions for sharpening the chain cutters to maintain performance and safety.

Chain Filing Angles and Depth Gauge

Guidance on filing angles and setting depth gauge clearance for chain maintenance.

Guide Bar Maintenance

Procedures for maintaining the guide bar, including cleaning and checking for wear.

Transporting and Storing the Saw

Instructions for safe transport and storage of the chain saw.

Bar and Chain Combinations

Troubleshooting

Common problems, their causes, and suggested solutions for the chain saw.