19 - English
WORK AREA PRECAUTIONS
See Figure 13.
Cut only wood or materials made from wood,
no sheet metal, no plastics, no masonry, no
non-wood building materials.
Never allow children to operate the saw. Allow
no person to use this chain saw who has not
read this Operator’s Manual or received ade-
quate instructions for the safe and proper use
of this chain saw.
Keep everyone – helpers, bystanders, children,
and animals – a safe distance from the cutting
area. During felling operations, the safe dis-
tance should be a least twice the height of the
largest trees in the felling area. During bucking
operations, keep a minimum distance of 15 feet
between workers.
Always cut with both feet on solid ground to
prevent being pulled off balance.
Do not cut above chest height, as a saw held
higher is difficult to control against kickback
forces.
Do not fell trees near electrical wires or build-
ings. Leave this operation for professionals.
Cut only when visibility and light are adequate
for you to see clearly.
FELLING TREES
See Figures 13 - 16.
HAZARDOUS CONDITIONS
WARNING:
Do not fell trees during periods of high wind or
heavy precipitation. Wait until the hazardous
weather has ended.
HINGE
2 in. OR 1/10 DIA
NOTCH –
APPROX. 1/3
DIAMETER OF
TRUNK
BACK CUT
2 in.
Fig. 14
NOTCH
BACK CUT
Fig. 15
HINGE
OPERATION
Fig. 13
PLANNED LINE
OF FALL
RETREAT PATH
RETREAT PATH
To Next Page
Loading...
