Page 6 — English
Some of the following symbols may be used on this tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
Kickback DANGER! BEWARE OF KICKBACK.
Hot Surface
To reduce the risk of injury or damage, avoid contact with
any hot surface.
Wear Gloves
Wear non-slip, heavy-duty protective gloves when
handling the chain saw.
Wear Safety Footwear Wear non-slip safety footwear when using this equipment.
No Smoking No smoking, sparks, or open flame.
Carbon Monoxide
Engines produce carbon monoxide which is an odorless,
deadly poison. Do not operate in an enclosed area.
Keep Bystanders Away Keep all bystanders and animals at least 50 ft. away.
Gasoline and
Lubricant
Use unleaded gasoline intended for motor vehicle use with
an octane rating of 87 [(R + M)/2] or higher. This product
is powered by a 2-cycle engine and requires pre-mixing
gasoline and 2-cycle lubricant.
SYMBOLS
To Next Page
Loading...
