Ryobi RY6200 User Manual

THANK YOU FOR BUYING A RYOBI CORDLESS CIRCULAR SAW.
Your new cordless circular saw has been engineered and manufactured to Ryobi’s high standard for dependability, ease of
operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: Carefully read through this entire operator’s manual before using your new cordless circular saw.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your cordless circular saw properly
and only for what it is intended, you will enjoy years of safe, reliable service.
Thank you again for buying Ryobi tools.
OPERATOR'S MANUAL
5-1/2 in. CORDLESS CIRCULAR
SAW MODEL NO. RY6200
SAVE THIS MANUAL FOR FUTURE REFERENCE
SPECIFICATIONS:
Blade Diameter 5-1/2 in. (140 mm)
Blade Arbor 3/8 in. (10 mm)
Cutting Depth at 0° 1-9/16 in. (40 mm)
Cutting Depth at 45° 1-1/8 in. (29 mm)
No Load Speed 3,800 RPM
Motor 14.4 Volt DC
Charge Rate 1 Hour
Charger Rating 120 Volts, 60 Hz, AC

Ryobi RY6200 Specifications

General

Brand	Ryobi
Model	RY6200
Category	Power Tool
Language	English

Summary

Rules for Safe Operation

Battery Tool Safety Rules

Safety guidelines specific to battery-powered tools, including warnings about misuse and hazards.

Charger Safety Instructions

Safety instructions for using the battery charger, including precautions against moisture and damage.

Circular Saw Safety Instructions

Specific safety guidance for operating circular saws, covering guards, blades, and kickback.

Operation

Charger and Battery Pack Basics

Blade Installation and Removal

Steps for safely changing the saw blade, including using the spindle lock.

Kickback Prevention Techniques

Explanation of kickback and methods to avoid it for safer operation.

Depth of Cut Adjustment

How to set the blade depth for different materials for optimal cutting.

Starting a Cut Safely

Maintaining Control During Cuts

Tips for stable operation and maintaining control during all cutting tasks.

Cross Cut and Rip Cut Guidance

Bevel Cutting and Adjustment

Pocket Cut Procedure

Rip Cut Guidance