3
1)
GETTING STARTED
Please take tim
e now to read and understand this manual thoroughly before you start cutting keys.
Maintain this owner’s manual and review it often, and make it available to others who will use this
machine.
2)
SAFETY FIRST
Do not attem
pt to operate this machine until you have read thoroughly and understand completely all
instructions, rules, etc. contained in this manual. Failure to comply can result in accidents involving fire,
electric shock, or serious personal injury.
SAFETY RULES
A) Know y
our machine. Read owner’s manual carefully. Learn its applications and lim
itations as well
as specific operational
hazards peculiar to this machine.
B)
Guard against electrical shock by prev
enting body contact with grounded surfaces.
Exam
ples: Pipes and metal work t
ops.
C)
Keep guards in place at all tim
es.
D)
Keep your work area clean. Clutte
red areas and benches invite accidents.
E)
Avoid dangerous environment. Don’t use this machine in damp or wet locations. Keep y
our work
area will lit.
F)
Keep children away. All visitors should be kept safe distance from work area. Do not let visito
rs
contact machine or power cord.
G)
Do not force the machine. It will do the job better and safer at the rate for which it was designed.
Always maintain a sharp cutter wheel on the m
achine.
H)
Use the machine for what it was designed. Don’t use the machine for anything but the key bl
anks for
wh
ich it was intended.
I) Wear proper apparel. For example: No loose clothing or jewelry to get caught in moving part
s. Long
hai
r. Operators without properly restrained long hair MUST NOT operate any type of machinery,
including key machines. Long hair can get caught in moving (rotating) machinery part
s.
J)
Use safety glasses. Flying chips, improperly secured key blanks and broken cutter wheel teet
h can
i
njure the eye if not properly protect
ed.
K)
Don’t abuse cord. Never yank cord to disconnect from receptacle. Keep cord from
heat, oil and sharp
edges. Never rem
ove the ground connection from the plug. If you use a two-wire adapter be sure to
properly connect the ground wire.
NEVER CUT OFF THE GROUND TERMINAL FROM THE
MACHINE’S POWER PLUG!
L)
Secure keys properly in vises. Don’t hold key head for support when cutting. If it doesn’t clam
p
properl
y, don’t try to cut it!
To Next Page
Loading...
