18
ROTARY TILLER MAINTENANCE
After the first 50 hours (running in)
a. Check that all nuts and bolts are secure. Tighten if
necessary.
b. Change the oil in the tiller drive unit as follows.
Remove plug (fig. 6, item 1) and turn the attach-
ment upside down to drain out the exhausted oil.
Return the attachment to the upright position, and
add 0.3 l of the same oil used for the machine
gearbox. Reinstall plug.
Every 300 hours
Change the tiller drive unit oil as instructed above.
To Next Page
Loading...