Need help?Do you have a question about the S-Lighting S-3 and is the answer not in the manual?
General| Brand | S-Lighting |
|---|---|
| Model | S-3 |
| Category | DJ Equipment |
| Language | English |
Covers earthing, qualified personnel, power handling, voltage, light exposure, mounting, and environmental limits.
Details power, voltage, LED type, brightness, beam angle, DMX, IP rating, dimensions, and weight.
Recommends frequent cleaning, using specific cloths, avoiding solvents, checking for loose parts, and using safety cables.
States only authorized dealers should perform maintenance and highlights fuse replacement precautions.
Explains mounting orientations, ventilation requirements, clamp usage, and safety eyebolt installation.
Discusses factors affecting LED lifespan, such as heat and intensity, and how to extend it.
Outlines requirements for data grade cables, including conductor pairs, capacitance, resistance, and impedance.
Details XLR connectors for DMX and the importance of termination to reduce signal errors.
Provides instructions on constructing a DMX terminator using a resistor.
Explains how to convert between 3-pin and 5-pin DMX connectors for compatibility.
Guides on connecting devices in a DMX chain and setting up master/slave configurations.
Covers setting DMX addresses and selecting operational modes (Mode 1-6).
Details adjusting color intensity (Red, Green, Blue) and speed parameters.
Explains how to test individual LEDs and configure unit settings like temperature units and channel modes.
Lists DMX functions and value ranges for 1-channel, 3-channel, and 3-channel pixel modes.
Details DMX functions and value ranges for 4-channel and 6-channel modes, including built-in programs.
Lists DMX functions and value ranges for 7-channel and 16-channel modes, including segment intensity controls.
To Next Page