27Safety
Folding booster seat
• Pull the upper part of the release strap out
and fold up the seat itself. Make sure that
it is locked firmly in its folded-up position.
• Press the booster seat’s headrest all the
way down.
• Press in the latches on the car’s regular
head restraint. Remove it, rotate it 180°
and remount it. Make certain it is locked
correctly.
ISOFIX child restraints can not be fitted in a
position with integrated booster seat.
WARNING
• Use only the vehicle’s lap and shoul-
der belt system when restraining the
child in the booster seat.
• The seat must not be modified or
changed in any way.
• Never leave a child unattended.
• The car’s regular head restraint must
always be turned 180° back to its orig-
inal position after the integrated
booster seat is folded away.
• Check to ensure that the belt is not
twisted or rubbing against any sharp
edges.
WARNING
Failure to follow all the manufacturer’s
instructions on the use of this child
restraint system can cause your child to
strike the vehicle´s interior during a
sudden stop or crash.
Label on integrated booster cushion
To Next Page
Loading...
