Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
• G Turn and Lane-Change Signals. See Turn and
Lane-Change Signals on page 3-7.
• O Headlamps. See Headlamps on page 3-14.
• 23 Headlamp High/Low Beam-Changer. See
Headlamp High/Low-Beam Changer on page 3-8.
• Flash-To-Pass Feature. See Flash-to-Pass
on page 3-8.
• - Fog Lamps. See Fog Lamps on page 3-16.
• I Cruise Control. See Cruise Control on
page 3-11.
Turn and Lane-Change Signals
The turn signal has two upward (for right) and
two downward (for left) positions. These positions
allow you to signal a turn or a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return
automatically.
An arrow on the instrument
panel cluster will flash in
the direction of the
turn or lane change.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it. The bottom of the outside
rearview mirrors may also be equipped with lane change
indicators.
As you signal a turn or a lane change, if the arrows flash
more quickly than normal, a signal bulb may be burned
out and other drivers won’t see your turn signal.
3-7
To Next Page
Loading...
