Taillamps, Turn Signal, Sidemarker,
Stoplamps and Back-up Lamps
A. Back-up
B. Turn Signal
C. Stoplamp/Taillamp
D. Sidemarker
To replace one of these bulbs, do the following:
1. Open the liftgate. See Liftgate/Liftglass on
page 2-13 for more information.
2. Remove the screws
from the taillamp
assembly.
3. Pull the taillamp assembly away from the vehicle.
4. Turn the bulb socket counterclockwise to remove it
from the taillamp assembly.
5. Pull the old bulb straight out from the bulb socket.
5-52
To Next Page
Loading...
