TRACTION CONTROL OFF - The driver can modify
the engine speed management system by momentarily
pressing the StabiliTrak
®
button on the transmission
shift handle. The StabiliTrak
®
light will come on and
TRACTION CONTROL OFF will be displayed. For
vehicles without a DIC, the StabiliTrak
®
indicator light
will come on. Momentarily pressing the StabiliTrak
®
button again will return the system to the STABILITRAK
ON mode.
STABILITRAK OFF - The driver can turn off StabiliTrak
®
by pressing the StabiliTrak
®
button for more than
five seconds. The StabiliTrak
®
light will come on and
STABILITRAK OFF will be displayed. For vehicles
without a DIC, the StabiliTrak
®
indicator light will come
on. Momentarily pressing the StabiliTrak
®
button again
will return the system to the STABILITRAK ON mode.
See StabiliTrak
®
Off below for more information.
Traction Control Off
In this mode, stability control and brake-traction control
are functional. Engine speed management will be
modified and the driven wheels can spin more freely.
This can cause the brake-traction control to activate more
frequently. If the controller detects excessive wheel spin
in this mode, the StabiliTrak
®
indicator light may blink and
the STABILITRAK ACTIVE message may be displayed
to warn the driver that damage may occur to the
transfer case.
4-10
To Next Page
