Climate Controls
Dual Automatic Climate Control
System
With this system you can control the heating,
cooling and ventilation for your vehicle. When your
vehicle is first started and the climate control
system is on, or if the climate control system has
been turned on, the display will show the
driver’s temperature setting for five seconds.
Then it will show the outside temperature.
9(Off): Press this button to turn off the entire
climate control system. Outside air will still
enter the vehicle, and will be directed to the floor.
Press the AUTO button, the mode button, the
fan arrows, or either temperature knob to turn the
system on.
C(Mode): Press this button to manually select
the air delivery mode to the floor, instrument panel,
or windshield outlets. The system will stay in the
selected mode until the mode button is pressed
again or the AUTO button is pressed.
Driver’s Side Temperature Knob: Turn this knob
clockwise or counterclockwise to raise or lower
the temperature on the driver’s side of the vehicle.
The display will show the temperature setting
decreasing or increasing and an arrow pointing
toward the driver. This knob can also adjust
the passenger’s side temperature setting if the
two are linked.
167
To Next Page
Loading...
