Temperature setting of refrigerating chamber
The alarm sound release operation can be carried out in the locked
state, and all other key operations must be
carried out in the unlocked state.
If the operation is in the locked state, an error buzzer will be
displayed.
Click the button to change the set temperature of refrigerating
chamber, each dick of temperature adjusting button of the refriger-
ating chamber, the set temperature will be reduced 1° C.
The temperature setting range of refrigerating chamber is 2-8 ℃.
When the set temperature is 2" C,
Click the button again, the set temperature of refrigerating cham-
ber will switch to 80 C.
Temperature setting of freezing chamber
Click the button to change the set temperature of freezing chamber,
each click of temperature
adjusting button of the freezing chamber, the set temperature will
be reduced 1 °C. The temperature
setting range for freezing chamber is -24~ -16°C. When the tem-
perature is -24 °C, click the button
again, the set temperature of freezing chamber will switch to -16 °C.
Mode setting
Long press the refrigeration temperature adjustment button (3s) to
set/cancel the holiday mode
refrigeration temperature display area is extinguished, and the
freezing is automatically set to -18°C;
Adjusting the refrigeration/freezing/super cool and super freezer
buttons will exit the holiday mode.
When exiting the holiday mode, the refrigeration set temperature
will automatically return to the set temperature before the holiday
mode; the freezing set temperature will automatically return to t
he set temperature before the holiday mode; enter the normal
operation mode.
GB GB
48 49
least 5 minutes before restarting the appliance or re-inserting
the plug into the wall outlet. This is to allow the protection device
in the compressor to reset.
If the compressor fails to start correctly remove the plug and wait
for 5 minutes before you try again then the compressor should
restart normally.
The room temperature
How often the door is opened
How much food is stored
Position of the appliance
When you set the correct temperature, all these factors
mentioned above shall be taken into account.
To Next Page
Loading...
