GB GB
54 55
.
o their highest position.
.
.
.
tion angle should be less than 45°.
em.
.g. a chair
.
.
position.
1.Remove all food from the inner door liner.
2. Remove the upper left hinge cover decorative cover, upper right
hinge cover and upper right hinge, and disconnect the right signal
line terminal 1 and signal line terminal 2 at the top of the box body.
3. Remove the refrigerated door body (be careful not to lose small
parts such as the shaft sleeve and stop on the door);
Remove the middle hinge and remove the decorative cover of hinge
hole on the other side.
r ap l l ams e so l o t t on l u f e r ac eb ( ydob r ood gn i zee r f eh t evomeR. . 4
such as the shaft sleeve and stop on the door);
Remove the hinge and adjust the angle. Remove and install the
lower hinge shaft to the other side of the hinge, and install the
To Next Page
Loading...
