EasyManua.ls Logo

Saba LVS10C42MINI-PLIX - Troubleshooting Tips

Saba LVS10C42MINI-PLIX
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9. Troubleshooting Tips
Before Calling for Service
Review the charts on the following pages may save you from call-
ing for service.
Problem Possible Causes What to Do
Technical problems
Dishwasher doesn’t start Fuse blown, or the circuit
breaker acted
Replace fuse or reset cir-
cuit breaker. Remove any
other appliances sharing
the same circuit with the
dishwasher
Power supply is not
turned on
Make sure the dishwasher
is turned on and the door
is closed securely.
Make sure the power cord
is properly plugged into
the wall socket.
Water pressure is low Check that the water
supply is connected
properly and the water is
turned on.
Door of dishwasher not
properly closed
Make sure to close the
door properly and latch it.
water not pumped from
dishwasher
Kink in drain hose Check drain hose.
Filter clogged Check the coarse lter
(see section titled « Clean-
ing The Filter»)
Kitchen sink clogged Check the kitchen sink to
make sure it is draining
well.
If the problem is the
kitchen sink not draining
,you may need a plumber
rather than a serviceman
for dishwashers
44
GB

Related product manuals