4. Prior using for the first time
Before using your dishwasher for the rst time:
A. Set the water softener
B. Add 1.5Kg dishwasher salt and then full ll the salt container
with water
C. Fill the rinse aid dispenser
D. Fill in detergent
A. Water Softener
• The water softener must be set manually, using the water
hardness dial.
• The water softener is designed to remove minerals and salts
from the water, which would have a detrimental or adverse
eect on the operation of the appliance.
• The higher the content of these minerals and salts, the
harder your water is.
• The softener should be adjusted according to the hardness of
the water in your area. Your local Water Authority can advise
you on the hardness of the water in your area.
Adjusting Salt Consumption
The dishwasher is designed to allow for adjustment in the
amount of salt consumed based on the hardness of the water
used. This is intended to optimise and customise the level of salt
consumption.
Please follow the steps below for adjustment in salt consump-
tion.
14
GB
To Next Page
Loading...
