A. After the lower basket has been removed, unscrew and
remove the cap from the salt container.
B. Place the end of the funnel (supplied) into the hole and
introduce about 1.5kg of dishwasher salt.
C. Full ll the salt container with water. It is normal for a small
amount of water to come out of the salt container.
D. After lling the container, screw the cap tightly back clock-
wise.
E. The salt warning light will stop being after the salt container
has been lled with salt.
F. Immediately after lling the salt into the salt container, a
washing program should be started (We suggest to use a
short program). Otherwise the lter system, pump or other
important parts of the machine may be damaged by salty
water. This is out of warranty.
NOTE:
1. The salt container must only be relled when the salt warn-
ing light in the control panel comes on. Depending on how
well the salt dissolves, the salt warning light may still be on
even though the salt container is lled.
17
GB
To Next Page
Loading...
