Prior to start up of the appliance
Final check
1. Connect the appliance to the mains supply and switch on the
mains supply.
2. Check function.
Once this simple operation has been carried out the oven is
ready to use for cooking.
This appliance is exclusively for domestic use.
Use the oven to cook food only.
Before cooking,make sure all oven accessories that are not
required are removed from the oven.
Pre-heat the oven to the cooking temperature before using it.
Place the cooking trays in the center of oven and leave space
in between when using more than one,so that the air can
circulate.
Do not put oven trays on the base of the oven or cover it with
aluminium foil. This will cause thermal accumulation. The
cooking and roasting times will not coincide and the enamel
may be damaged.
Try to open the oven door as little as possible to see the food
(the oven light remains on during cooking).
Take care when opening the door to avoid contact with hot
parts and steam.
GB GB
83
82
supply only by an authorized qualified person and the
appliance is only guaranteed after correct installation.
Risk of electric shock, short circuit or fire by damage of the
mains lead! The mains lead must not be clamped, bent or
trapped or come into contact with hot parts of the appliance.
If the mains lead is damaged, it must be replaced by a qualified
electrician.
The mains supply must correspond to be data specified on the
rating plate of the appliance. The appliance mains cable must
correspond to the specifications and the power consumption.
Risk of electric shock!
Before starting any work on the electrical installation, please
disconnect the appliance from the mains supply.
Installation
1. Slide the oven through the cabinet aperture, align and secure.
2. Fix your oven with the 2 screws and washers as indicated in the
figure.
To Next Page
Loading...