GB GB
81
80
Before installation
The appliance should be installed built in the cabinet . It should be
keep safety distance with appliance and the kitchen walls. Detail
please check below picture . (values in mm).
Surfaces, synthetic laminates and adhesives used must be heat
resistant(100˚C minimum), and neighbouring unit fronts up
to 70˚C.
Kitchen cabinets must be set level and fixed. A gap of 5 mm is
required between the appliance and surrounding unit fronts.
If there is a drawer beneath the oven, a shelf must be
installed between oven and drawer.
Installation
Installation method
Installation and connection
Connection to the mains supply
This appliance must be earthed!
▲Material damage!
The door and/or handle must not be used for lifting or moving
the appliance.
For installation the appliance must be connected in
accordance with all local gas and/or electrical regulations.
Carry the appliance with at least two persons.
Use the slots or wire handles located at both sides to move the
appliance.
Our company shall not be held responsible for any damage
caused by using the appliance without an earthed socket.
Risk of electric shock, short circuit or fire by unprofessional
installation! The appliance may be connected to the mains
To Next Page
Loading...