Sabiana Carisma CRC-ECM User Manual

83
For more details
see the “Carisma CRC” Catalogue
When polluted air goes through
the mechanical pre-filter (Phase 1)
the particles ≥ 50 μm are eliminated
(powder, insects, etc.).
Then the smallest particles (50÷0.01
μm) are exposed to an intensive
ionic field and are polarized (Phase 2).
The charged particles passing through
the second filter section, are pushed back
by the anode and attracted to the collection
surfaces by a strong, induced magnetic field
(Phase 3).
The air which leaves the unit is free from polluting particles.
OUTLET
OF CLEAN AIR
INLET
OF POLLUTED AIR
PHASE
3
PHASE
2
PHASE
1
Air without
particles < 1 µm
Air without
particles ≥ 50 µm
Pre-filter
Electrostatic
filter
Collection
surface
Inducted
anode
Polarized
electrode
Ionic field
Elimination
of the biggest
particles
The CRYSTALL SABIANA electrostatic filter matches
the need for better air conditioning with the concepts
of space and design.
With this filter the various stages of air treatment are
combined in one appliance.
Thanks to this new patented filter (efficiency compliant
with new Standard UNI 11254), air pollutants such as
cigarette smoke, dust (PM10, PM2.5), pollen and most
biological organisms are eliminated.
In addition, as fresh air is not being introduced to obtain
the best climatic conditions, there are consequential energy savings.
Introduction
Operating principle
of the CRYSTALL SABIANA electronic filter
Emission
of conditioned air
Casing
Heat exchanger
CRC–ECM
Centrifugal fan
Electrostatic filter
Pre-filter
Ambient
air intake
(CRC–ECM only)
Crystall

Sabiana Carisma CRC-ECM Specifications

General

Brand	Sabiana
Model	Carisma CRC-ECM
Category	Computer Hardware
Language	English