SABROE ATLAS V619 User Manual

34
CENTRAL SALT DOSING PLANT
Principle
Salt and water are mixed in a tank, the size of which de-
pends on the amount of ice produced, the actual hydrologic
condi tions, and the intervals wanted between each filling
with salt. A float valve ensures continuous dis solution of
the salt.
Each dosing pump is equipped with a variable timer for dos-
ing the required quantity of salt solution to the flake ice
machine in question.
If the flake ice machine is not in operation, the dosing
pump will stop, as the ice machine and the dosing pump must
work at the same time.
In cases where machines are placed in a high and not easily
accessible position, e.g. above a silo, the mixing tank and
the dosing pumps ean be placed at a convenient point below
the ice machine, for instance on the ground floor, in order
to facilitate salt refilling.
The dosing pumps should always be filled with salt solution
which is secured in the easiest way by placing these under
the levelof the mixing tank.
Experience has shown that the required amount of salt rates
from O to 500 grams per ton of ice, corresponding to 0-2.2
litres of saturated salt solution per ton of ice.
--,
I
I
I
I~"
~
Y
I
__ .-J.. _______ .J.. ______ .J.. ______ .-. __ ...I

SABROE ATLAS V619 Specifications

General

Brand	SABROE
Model	ATLAS V619
Category	Ice Maker
Language	English